Loading ...
Loading ...
Loading ...
2N TELEKOMUNIKACE a.s., www.2n.cz 24/134
PoE Supply Connection
Use a standard straight RJ-45 terminated cable to connect to 2N Indoor Compact
®
the Ethernet. The device supports the 10BaseT and 100BaseT protocols. The Ethernet
connection state is indicated by a hung-up receiver symbol . If the symbol flashes,
the device is disconnected from the network.
Caution
Factory reset results in a change of the Ethernet interface configuration!
A defective Ethernet cable may lead to a high packet loss in the
Ethernet and subsequent instability and poor call quality!
Warning
Do not connect any external power supply if PoE is used and vice versa.
Connection of a defective or improper power supply may lead to a
temporary or permanent device failure.
Ethernet cable connector Ethernet socket
Firmware Upload
We recommend you to upgrade the firmware during installation. 2N Indoor Compact
®
Refer to for the latest FW version. Refer to for the firmware www.2n.cz 3.2.5 System
upgrade procedure.
Loading ...
Loading ...
Loading ...