Loading ...
Loading ...
Loading ...
ScopeMeter
®
Test Tool
Memory and PC
53
In persistence mode, the most recent waveform will be saved, not all waveforms that build the
persistence display.
The file list of stored data uses these icons:
• setup + 1 screen
• setup + replay screens/record data
• setup + trendplot data
• screen image (imagexxx.bmp)
You can copy a screen image to a USB stick connected to the test tool. The USB stick connected
to a PC allows you to insert the image, for example, into a text document. The copying function is
available under SAVE and File OPTIONS. A screen image can not be recalled on to the screen.
Save Screens with Associated Setups
To save, for example a screen + setup, in Scope mode:
1. Press
S to show the SAVE key labels.
From this point the screen is frozen.
2. Press 1 to open the SAVE menu.
Observe the number of available and used memory locations.
In METER mode the SAVE AS menu shows as only a setup+screen to save, see step 4.
3. Press 1 to select the target memory INT (internal memory) or USB (USB device).
Observe the new SAVE menu if you select USB.
You can save data in .csv format to a USB stick. The saved .csv file can be used to analyze
the data in, for example, FlukeView ScopeMeter or in Excel.
4. Use the cursor and E to select Screen+Setup and open the SAVE AS menu.
Below Save As, the default name + serial number and OK SAVE are selected. To modify the
name for this particular Screen+Setup or to modify the default name, see Editing Names.
5. Press E to save the Screen+Setup.
6. To resume measurements, press
H.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...