User Manual FLUKE MDA-550/FPC Motor Drive Analyzer with one-year Premium Care, 500 MHz, 4-channel

Documents for FLUKE MDA-550/FPC

User Manual for the Fluke MDA-550/FPC Motor Drive Analyzer with one-year Premium Care, 500 MHz, 4-channel

For MDA-550/FPC.

• 190 Series III Users Manual1
  • LIMITED WARRANTY AND LIMITATION OF LIABILITY2
  • Table of Contents3
• Introduction7
• Unpack the Test Tool Kit9
• How to Use the Test Tool9
  • Test Tool Power11
  • Test Tool Reset12
  • Menus13
  • Key Illumination14
  • Input Connections14
    • Scope15
    • MDA Test Tool16
  • Probe Type Setup17
  • Input Channel Selection18
  • View an Unknown Signal with Connect-and-View™18
  • Automatic Scope Measurements19
  • Freezing the Screen20
  • Average, Persistence and Glitch Capture20
    • Using Average for Smoothing Waveforms20
    • Smart Average21
    • Persistence, Envelope and Dot-Join to View Waveforms21
    • Glitch Display22
    • High Frequency Noise Suppression23
  • Waveform Acquisition23
    • Set the Acquisition Speed and Waveform Memory Depth23
    • AC-Coupling Selection24
    • Reversing the Polarity of the Displayed Waveform24
    • Variable Input Sensitivity24
    • Noisy Waveforms25
    • Mathematic Functions +, -, x, XY-mode25
    • Mathematic Function Spectrum (FFT)26
    • Waveform Comparisons27
  • Pass - Fail Tests29
  • Waveform Analysis29
  • Automatic Meter Measurements (190-xx4)29
    • Meter Measurement Selection29
    • Relative Meter Measurements30
  • Multimeter Measurements (190-xx2)32
    • Meter Connections32
    • Resistance Value Measurement32
    • Current Measurement33
    • Auto/Manual Range Selection34
    • Relative Meter Measurements35
• Recorder Functions36
  • Recorder Main Menu36
  • Measurements Over Time (TrendPlot™)36
    • TrendPlot Function36
    • Recorded Data Display37
    • Recorder Options37
    • Turn Off the TrendPlot Display38
  • Recording Scope Waveforms In Deep Memory (Scope Record)38
    • Starting a Scope Record Function38
    • Recorded Data Display39
    • Scope Record in Single Sweep Mode39
    • Triggering to Start or Stop Scope Record39
  • TrendPlot or Scope Record Analysis40
• Replay, Zoom and Cursors41
  • Replay the 100 Most Recent Scope Screens41
    • Replay Step-by-Step41
    • Replay Continuously42
    • Turn Off the Replay Function42
    • Capturing 100 Intermittent Signals Automatically42
  • Zoom on a Waveform43
  • Cursor Measurements44
    • Horizontal Cursors on a Waveform44
    • Vertical Cursors on a Waveform45
    • Cursors on a Mathematical Result (+ - x) Waveform46
    • Cursors on Spectrum Measurements46
    • Rise Time Measurements46
• Waveform Triggers48
  • Trigger Level and Slope48
  • Trigger Delay or Pre-Trigger49
  • Automatic Trigger Options50
  • Edge Triggers51
    • Noisy Waveform Triggers51
    • Single Event Acquisition52
    • N-Cycle Trigger52
  • External Waveform Triggers (190-xx2)53
  • Pulse Triggers54
    • Narrow Pulses54
    • Missing Pulses55
• Memory and PC56
  • USB Ports56
  • USB Drivers57
  • Save and Recall57
  • Save Screens with Associated Setups58
    • All Memories in Use59
    • Editing Names59
  • Save Screens in .bmp Format (Print Screen)59
  • Delete Screens with Associated Setups60
  • Recall Screens with Associated Setups60
  • Recall a Setup Configuration61
  • View Stored Screens61
  • Rename Stored Screens and Setup Files62
  • Copy/Move Stored Screens and Setup Files62
  • FlukeView™ 2 Software63
  • Computer Connection63
  • WiFi Connection64
• MDA-550-III Test Tool65
  • Motor Drive Input67
    • Voltage and Current67
    • Voltage Unbalance68
    • Current Unbalance69
    • Harmonics69
  • Motor Drive DC-Bus71
    • Voltage DC Level71
    • Voltage AC Ripple71
  • Motor Drive Output72
    • Voltage and Current (Filtered)72
    • Voltage Modulation73
    • Spectrum74
    • Voltage Unbalance75
    • Current Unbalance75
  • Motor Input75
  • Motor Shaft76
• Tips78
  • Standard Accessories78
  • Independently Floating Isolated Inputs79
  • Tilt Stand83
  • Kensington® Lock84
  • Hangstrap84
  • Reset the Test Tool84
  • Language Setup85
  • Brightness85
  • Date and Time85
  • Battery Life86
    • Power Down Timer86
    • Display AUTO-off Timer86
  • Auto Set Options87
• Maintenance88
  • Storage88
  • Li-ion Battery Pack88
    • Charging the Batteries89
    • Battery Pack Replacement90
  • Voltage Probe Calibration92
  • Version and Calibration Information93
  • Battery Information94
  • Replacement Parts94
  • Optional Accessories95
  • Troubleshooting97