FLUKE MDA-550/FPC User Manual for the Fluke MDA-550/FPC Motor Drive Analyzer with one-year Premium Care, 500 MHz, 4-channel

Loading ...

190 Series III

Users Manual

Figure 5. The Screen After an Auto Set

Use

L K N V at the bottom of the keypad to change the view of the waveform

manually.

Automatic Scope Measurements

The test tool offers a wide range of automatic scope measurements. In addition to the waveforms

you can show four numeric readings: READING 1 - 4. These readings are selectable

independently, and the measurements can be done on the input A, input B, input C or input D

waveform.

To choose a Peak-Peak measurement for Input A, do the following:

1. Press

P to show the SCOPE key labels.

2. Open the READING menu with 2.

3. Select the reading number with 1, for example READING 1.

4. Use the cursor and E to select on A. Observe that the highlight jumps to the present

measurement.

5. Use the cursor and E to select the Hz measurement.

Observe that the top left of the screen shows the Hz measurement. See Figure 6.

To choose also a frequency measurement for Input B as second reading:

1. Press

P to show the SCOPE key labels.

2. Open the READING.. menu with 2.

3. Select the reading number with 1, for example READING 2.

4. Use the cursor and E to select on B. The highlight jumps to the measurements field.

5. Use the cursor and E to open the PEAK menu.

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE MDA-550/FPC Motor Drive Analyzer with one-year Premium Care, 500 MHz, 4-channel