FLUKE MDA-550/FPC User Manual for the Fluke MDA-550/FPC Motor Drive Analyzer with one-year Premium Care, 500 MHz, 4-channel

Loading ...

ScopeMeter

Test Tool

How to Use the Test Tool

4. Use the cursor and E to:

a. Select on A. Observe that the highlight jumps to the present measurement.

b. Select the A dc measurement.

c. Select a current probe sensitivity that matches the connected current probe. See Probe

Type Setup.

The display shows the screen in Figure 10.

Figure 10. Meter Screen

Note

To change the current probe sensitivity later, select another type of measurement (for

example, Vdc) and then select Amps again to see the sensitivity menu.

Relative Meter Measurements

A relative measurement displays the present measurement result relative to a defined reference

value. The following example shows how to perform a relative voltage measurement.

First obtain a reference value:

1. Press

M to show the METER key labels.

2. Measure a voltage to use as a reference value.

3. Press 2 to set RELATIVE to ON. ON is highlighted.

This stores the reference value as reference for subsequent measurements. Observe the

ADJUST REFERENCE soft key (3) that enables you to adjust the reference value.

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE MDA-550/FPC Motor Drive Analyzer with one-year Premium Care, 500 MHz, 4-channel