Loading ...
Loading ...
Loading ...
190 Series III
Users Manual
52
USB Drivers
To communicate, the test tool requires USB driver installation on your computer. Windows 10 and
later automatically recognizes the test tool and uses the drivers supplied by Windows. No special
drivers are required. Windows activates these drivers the first time you connect the test tool. An
admin account and active Internet connection may be required to allow Windows to load the
latest drivers.
After you install the drivers, an additional USB Composite Device shows in the Windows Device
Manager, Universal Serial Bus Controllers section. At this point, you are ready to use
FlukeView 2 software through the USB connection.
Next to the USB device is also a USB Serial Device (COM 3) that shows in the Windows Device
Manager Ports section. This Com port is for calibration purpose.
Note
The COM port number may differ and is automatically assigned by Windows.
Save and Recall
The test tool can:
• Save screens and setups to internal memory, and recall them again from memory. The test
tool has 30 screen and setup memories, 10 record and setup memories, and 9 screen image
memories. See Tabl e 4 .
• Save up to 256 screens and setups to a USB memory device, and recall them again from
memory.
• Name saved screens and setups according to your own preferences.
• Recall screens and recordings to analyze the screen image at a later date.
• Recall a setup to continue a measurement with the recalled operating configuration.
Saved data is stored in non-volatile Flash memory. Not saved instrument data is stored in RAM
memory and will be kept at least 30 seconds when the battery is removed when no power is
supplied via the BC190 power adapter.
Table 4. Test Tool Internal Memory
Mode
Memory Locations
30x 10x 9x
Meter Setup + 1 screen --- Screen image
Scope Setup + 1 screen Setup + 100 replay screens Screen image
Scope Recorder --- Setup + record data Screen image
TrendPlot --- Setup+ TrendPlot data Screen image
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...