FLUKE MDA-550/FPC User Manual for the Fluke MDA-550/FPC Motor Drive Analyzer with one-year Premium Care, 500 MHz, 4-channel

Loading ...

190 Series III

Users Manual

Replay, Zoom and Cursors

This section covers the capabilities of the analysis functions Cursor, Zoom, and Replay. These

functions can be used with one or more of the primary functions Scope, TrendPlot or Scope

Record. It is possible to combine two or three analysis functions.

A typical application uses these functions:

• replay the last screens to find the screen of special interest

• zoom in on the signal event

• make measurements with the cursors.

Replay the 100 Most Recent Scope Screens

When you are in Scope mode, the test tool automatically stores the 100 most recent screens.

When you press the HOLD key or the REPLAY key, the memory contents are frozen. Use the

functions in the REPLAY menu to go back in time by stepping through the stored screens to find

the screen of your interest. This feature lets you capture and view signals even if you did not

press HOLD.

Replay Step-by-Step

To step through the last scope screens:

1. From Scope mode, press

R open the REPLAY menu.

Observe that the waveform is frozen and that REPLAY appears at the top of the screen. See

Figure 20.

2. Press 1 to step through the previous screens.

3. Press 2 to step through the next screens.

Observe that the bottom of the waveform area displays the replay bar with a screen number

and related time stamp.

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE MDA-550/FPC Motor Drive Analyzer with one-year Premium Care, 500 MHz, 4-channel