FLUKE MDA-550/FPC User Manual for the Fluke MDA-550/FPC Motor Drive Analyzer with one-year Premium Care, 500 MHz, 4-channel

Loading ...

190 Series III

Users Manual

Relative Meter Measurements

A relative measurement displays the present measurement result relative to a defined reference

value. You can use this feature to monitor input activity (voltage, temperature) in relation to a

known good value.

To make a relative voltage measurement:

1. Obtain a reference value.

2. Press

M to show the METER key labels.

3. Measure a voltage to be used as the reference value.

4. Press 2 to set RELATIVE to ON. ON is highlighted.

This saves the reference value as reference for subsequent measurements. Observe the

ADJUST REFERENCE soft key (3) that enables you to adjust the reference value.

5. Measure the voltage to compare to the reference.

Now the large reading is the actual input value minus the stored reference value. The

bargraph indicates the actual input value. The actual input value and the reference value are

displayed below the large reading (ACTUAL: xxxx REFERENCE: xxx). See Figure 16.

Figure 16. Making a Relative Measurement

To adjust the reference value:

1. Press 3 to open the ADJUST REFERENCE menu.

2. Use

g f to select the digit to adjust.

3. Use

h i

to adjust the digit. Repeat until finished.

4. Press E to use the new reference value.

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE MDA-550/FPC Motor Drive Analyzer with one-year Premium Care, 500 MHz, 4-channel