MP11SE User Manual

Loading ...

EDIT Menu

EDIT Menu parameters (MIDI OUT)

Controllers

1. Right Pedal

on, off

This parameter determines whether or not the right pedal of

the GFP-3 pedal unit is active for the selected zone.

2. Right Pedal Assign cc#0 ~ cc#119, aftertoucH

This parameter selects the function assigned to the right pedal

of the GFP-3 pedal unit.

* This parameter is common for all four MIDI zones.

3. Half Pedal Values

normal, HigH, low, mid HigH, mid low

This parameter changes the half pedal ranges sent by the right pedal of the GFP-3 pedal unit for the selected zone.

This parameter is useful when using the MP11SE to control external tone generators (e.g. software pianos) that respond to damper pedal behaviour dierently.

Half Pedal Value Value Range Description

Normal

(default) 0 ~ 127 The damper pedal sends a full range of evenly distributed values.

High 0, 64 ~ 127 The damper pedal sends a full range of evenly distributed values after the half-pedal point is reached.

Low 0 ~ 63, 127 The damper pedal sends a full range of evenly distributed values before the half-pedal point is reached.

Mid High

0, 50 ~ 100, 127

The damper pedal sends a full range of evenly distributed values between 50 and 100.

Mid Low

0, 25 ~ 75, 127

The damper pedal sends a full range of evenly distributed values between 25 and 75.

4. Center Pedal on, off

This parameter determines whether or not the centre pedal of

the GFP-3 pedal unit is active for the selected zone.

5. Center Pedal Assign cc#0 ~ cc#119, aftertoucH

This parameter selects the function assigned to the centre pedal

of the GFP-3 pedal unit.

* This parameter is common for all four MIDI zones.

6. Left Pedal on, off

This parameter determines whether or not the left pedal of the

GFP-3 pedal unit is active for the selected zone.

7. Left Pedal Assign cc#0 ~ cc#119, aftertoucH

This parameter selects the function assigned to the left pedal of

the GFP-3 pedal unit.

* This parameter is common for all four MIDI zones.

8. Pitch Bend on, off

This parameter determines whether or not the pitch bend

wheel is active for the selected zone.

9. Pitch Bend Range value: 0 ~ 12

This parameter sets the range of the pitch bend wheel in semi-

tone steps.

* The range diers for the internal sound (0 ~7) and MIDI (0~12) sections.

10. Modulation Wheel on, reverse, off

This parameter determines whether or not the modulation

wheel is active for the selected zone.

When set to ‘Reverse’, the wheel’s output values will be inverted.

11. Modulation Wheel Assign

cc#0 ~ cc#119,

aftertoucH

This parameter selects the function assigned to the MP11SE’s

modulation wheel.

12. Modulation Depth Range value: 0 ~ 127

This parameter sets the range of the pitch modulation function

in steps of 600/127 cents.

Loading ...

User Manual - Page 57