Loading ...
Loading ...
Loading ...
38
EDIT Menu
Overview of the EDIT Menu (PIANO, E.PIANO, SUB)
The EDIT menu contains various parameters that can be used to adjust the MP11SE’s internal sound sections. The
parameters are grouped by category, allowing close control over the instrument with just a few button presses.
* The EDIT menu can also be used to adjust parameters of the MIDI OUT section. For more information, please refer to page 54.
This collection of parameters, together with other adjustable settings, can be stored as a SETUP memory (page
61). The MP11SE provides 26 banks x 8 setups, for a total of 208 user programmable SETUP memories.
About Common parameters ( icon)
Unless stated, parameter settings for the PIANO, E.PIANO, and SUB sound sections are independent for each section.
However, parameters marked with a
icon are common for all three sound sections. For example, changing the Reverb Type
parameter for the PIANO section will automatically change the
Reverb Type parameter for the E.PIANO, and SUB sections.
Moreover, the
Split Point parameter is unique in that it is common for all three sound sections and four MIDI zones.
PIANO/E.PIANO/SUB section parameters
No. Category Parameters
1 REVERB Type, Pre Delay, Time, Depth
2
EFX Category, Type, Parameters
(prm1~prm10, depending on EFX type)
AMP Amp Type, Drive, Level, Amp EQ Lo, Amp EQ Mid, Amp EQ Hi, Mid Freq., Mic Type, Mic Position, Ambience
3 Sound
Master Volume, Panpot, Filter Cut-o, Filter Resonance, DCA Attack Time, DCA Decay Time,
DCA Sustain Level, DCA Release Time, DCF Attack Time, DCF Attack Level, DCF Decay Time,
DCF Sustain Level, DCF Release Time, DCF Touch Depth, DCA Touch Depth, Vibrate Depth, Vibrate Rate,
Vibrate Delay, Octave Layer Switch, Octave Layer Level, Octave Layer Range, Octave Layer Detune,
Layer Vocal, Layer Bell, Layer Air
4 Tuning Fine Tune, Stretch Tuning, Temperament, Key of Temperament
5 Key Setup
Touch Curve, Dynamics, Key Volume, Minimum Touch, Octave Shift, Zone Transpose, Key Scaling Damping,
Key Scaling Key, Key Range Type,
Split Point, Key Range Zone Lo, Key Range Zone Hi
6 Controllers
Right Pedal,
Right Pedal Assign, Damper Pedal Mode, Center Pedal, Center Pedal Assign, Left Pedal,
Left Pedal Assign, Pitch Bend, Pitch Bend Range, Soft Pedal Depth, Modulation Wheel,
Modulation Wheel Assign, Modulation Depth Range, Foot Switch Pedal,
Foot Switch Pedal Assign,
Expression Pedal,
Expression Pedal Assign
7 Knob Assign
Knob A Assign, Knob B Assign, Knob C Assign, Knob D Assign,
Knob2 A Assign, Knob2 B Assign, Knob2 C Assign, Knob2 D Assign
8
Virtual
Technician
piano: Voicing, String Resonance, Undamped Resonance, Damper Resonance, Key-o Eect, Damper
Noise, Hammer Delay, Fall-back Noise, Topboard, Stereo Width, Brilliance
e.piano/sub*: Key-o Noise, Key-o Delay
* SUB section Virtual Technician parameters applicable to Harpsichord and Bass sounds only.
Entering the EDIT Menu
When either the PIANO, E.PIANO, or SUB section is selected:
Press the EDIT button.
The LED indicator for the EDIT button will turn ON, and the Edit
Menu for the selected section will be shown in the LCD display.
PIANO
section
selected
LED indicator ON:
EDIT mode is turned ON
* To change the selected sound section, press the F1~F3 buttons.
Loading ...
Loading ...
Loading ...