Loading ...
Loading ...
Loading ...
43
EDIT Menu
EDIT Menu parameters (PIANO, E.PIANO, SUB)
Time
Volume
Key ON Key OFF
5
6
7
8
About DCA Parameters
The DCA (Digitally Controlled Amplier) parameters, are used to
adjust the volume level of a sound over time using an envelope.
The diagram below indicates the MP11SE’s DCA parameters.
About DCF Parameters
The DCF (Digitally Controlled Filter) parameters, are used to
adjust a low-pass lter applied to the sound over time.
The diagram below indicates the MP11SE’s DCF parameters.
Time
Frequency
Key ON Key OFF
9
11
12
13
10
16. Vibrate Depth value: –64 ~ +63
This parameter adjusts the depth of the vibration applied to the
selected sound.
17. Vibrate Rate value: –64 ~ +63
This parameter adjusts the speed of the vibration applied to the
selected sound.
18. Vibrate Delay value: –64 ~ +63
This parameter adjusts the delay time before the start of the
vibration.
19. Octave Layer Switch off, on
This parameter turns the additional Octave Layer ON or OFF.
20. Octave Layer Level value: 0 ~ 127
This parameter adjusts the volume level of the Octave Layer.
21. Octave Layer Range value: –2 ~ +2
This parameter sets the amount of octave transposition for the
Octave Layer.
22. Octave Layer Detune value: –64 ~ +63
This parameter adjusts the tuning of the Octave Layer.
23. Layer Vocal value: off, 1 ~ 127
This parameter adjusts the amount of Vocal sound that is added
to the selected sound.
24. Layer Bell value: off, 1 ~ 127
This parameter adjusts the amount of Bell sound that is added to
the selected sound.
25. Layer Air value: off, 1 ~ 127
This parameter adjusts the amount of Air sound that is added to
the selected sound.
Loading ...
Loading ...
Loading ...