Loading ...
Loading ...
Loading ...
37
Main Operation
MIDI OUT Section
Adjusting Zone parameters (MIDI control change)
From the MIDI zone volume screen:
Press one of the F1~F4 buttons.
The rst page of MIDI control change for the selected zone will
be shown in the LCD display.
Turn the control knobs (A, B, C, D) to adjust the MIDI control
change parameters assigned to that knob.
* For information about changing the MIDI control change parameters
assigned to each control knob, please refer to page 59.
* When a zone is selected, pressing the F1~F4 button corresponding to that
zone will toggle between the rst and second pages of parameters.
Adjusting the Zone key range
Press and hold a ZONE button, press the desired top key, and
then the desired bottom key of the keyboard.
The names of the pressed top and bottom keys will be shown
in the LCD display, and will become the new key range for the
selected zone.
Top key:
F1
Bottom key:
F3
* To reset the key range back to all 88 keys (Full Keyboard), press and hold a
zone button, then press the topmost and bottommost keys.
LOCAL OFF button
Press the LOCAL OFF button to disable the connection between
the MP11SE’s keyboard and internal tone generator.
The LED indicator for the LOCAL OFF button will turn ON or OFF
to indicate the current status of the LOCAL OFF function.
* It is also possible to adjust parameters by pressing the CURSOR buttons to
select the desired parameter, then pressing the -/NO or +/YES buttons to
decrease or increase values.
Example: To set the Zone1 key range between key F1
and F3, press and hold the ZONE1 button, press the F1
key, and then press the F3 key.
Zone key range
Top: F1
Bottom: F3
hold
LED indicator ON:
Internal tone generator is disconnected
Loading ...
Loading ...
Loading ...