Loading ...
Loading ...
Loading ...
DJI Air 3
User Manual
86
©
2023 DJI All Rights Reserved.
Flight Pause/RTH Button
Press once to make the aircraft brake and hover in place. Press and hold the button until the
remote controller beeps and starts RTH, the aircraft will return to the last recorded Home Point.
Press this button again to cancel RTH and to regain control of the aircraft.
Customizable Button
To customize the function of this button, go to Settings in DJI Fly and select Control.
Remote Controller Alert
The remote controller sounds an alert during RTH. The alert cannot be canceled. The remote
controller sounds an alert when the battery level of the remote controller is 6% to 10%. A low
battery level alert can be canceled by pressing the power button. The critical low battery level
alert, which is triggered when the battery level is less than 5%, cannot be cancelled.
The battery level LEDs will start blinking slowly after disconnecting with the aircraft. DJI Fly will
prompt warning after disconnecting with the aircraft.
Optimal Transmission Zone
The signal between the aircraft and the remote controller is most reliable when the remote
controller is positioned towards the aircraft as depicted below.
Optimal Transmission Zone
Loading ...
Loading ...
Loading ...