Loading ...
Loading ...
Loading ...
DJI Air 3
User Manual
66
©
2023 DJI All Rights Reserved.
Status LED Descriptions
Blinking Pattern Description
—
Solid yellow
The charging hub is idle
Pulses green
Charging the battery or accumulating power
—
Solid green
All batteries fully charged or supplying power to external
devices
Blinks yellow
Temperature of the batteries is too low or too high (no
further operation needed)
—
Solid red
Power supply error or battery error (remove and reinsert the
batteries or unplug and plug in the charger)
Battery Protection Mechanisms
The battery level LEDs can display battery protection notifications triggered by abnormal
charging conditions.
Battery Protection Mechanisms
LED1 LED2 LED3 LED4 Blinking Pattern Status
LED2 blinks twice per second Overcurrent detected
LED2 blinks three times per
second
Short circuit detected
LED3 blinks twice per second Overcharge detected
LED3 blinks three times per
second
Over-voltage charger detected
LED4 blinks twice per second Charging temperature is too low
LED4 blinks three times per
second
Charging temperature is too high
If any of the battery protection mechanisms are activated, unplug the charger, and plug it in
again to resume charging. If the charging temperature is abnormal, wait for it to return to
normal. The battery will automatically resume charging without the need to unplug and plug
the charger again.
• Power accumulation stops automatically in the following situations:
a. The receiving battery is fully charged, or the power of the output battery is lower
than 5%.
b. A charger or external device is connected to the charging hub or any battery is
inserted or withdrawn from the charging hub during power accumulation.
c. Power accumulation is interrupted for more than 15 minutes due to abnormal
battery temperature.
• After accumulating power, charge the battery with the lowest power level as soon as
possible to avoid discharge.
Loading ...
Loading ...
Loading ...