Dji CPMA0000069301 Owner's Manual

Loading ...

DJI Air 3

User Manual

• Using the Remote Controller: Press once the Fn button (RC-N2) or C1 button (DJI RC 2)

to pin a waypoint.

• Using the Operation Panel: Tap

on the operation panel to pin a waypoint.

• Using the Map: Enter the map view and tap on the map to pin a waypoint.

Press and hold on a waypoint to move its position on the map.

• When setting a waypoint, it is recommended to y to the location for a more accurate

and smoother imaging result.

• The aircraft horizontal GNSS position, altitude from the takeo point, heading, gimbal

tilt, and camera zoom ratio will be recorded if the waypoint is pinned via the remote

controller or the operation panel.

• If the user need to add waypoints during the flight, make sure to use the camera

selected in the ight route parameters. When the user switches to other camera in the

camera view while adding waypoints during the ight, the zoom ratio of the waypoints

created with the other camera cannot be recorded by the aircraft, and the zoom setting

of these waypoints will be restored to manual.

• Connect the remote controller to the internet and download the map before using

the map to pin a waypoint. When the waypoint is pinned via the map, only the aircraft

horizontal GNSS can be recorded, and the default altitude of the waypoint is set to 50 m.

• The flight route will curve between waypoints, so the aircraft altitude between

waypoints may become lower than the altitudes of the waypoints during the flight.

Make sure to avoid any obstacles below when setting a waypoint.

b. Settings

Tap the waypoint number for settings. The waypoint parameters are described as

follows:

Loading ...

Dji CPMA0000069301