Dji CPMA0000069301 Owner's Manual

Loading ...

DJI Air 3

User Manual

• DO NOT use other wireless devices operating at the same frequency as the remote

controller. Otherwise, the remote controller will experience interference.

• A prompt will be displayed in DJI Fly if the transmission signal is weak during flight.

Adjust the antennas to make sure that the aircraft is in the optimal transmission range

Linking the Remote Controller

The remote controller is already linked to the aircraft when purchased together as a combo.

Otherwise, follow the steps below to link the remote controller and the aircraft after activation.

1. Power on the aircraft and the remote controller.

2. Launch DJI Fly.

3. In camera view, tap

and select Control and then Re-pair to Aircraft. During linking, the

status LED of the remote controller blinks blue and the remote controller beeps.

4. Press and hold the power button of the aircraft for more than four seconds. The aircraft

beeps twice after a short beep, and its battery level LEDs blink in sequence to indicate it is

ready to link. The remote controller will beep twice, and its status LED will turn solid green to

indicate linking is successful.

• Make sure the remote controller is within 0.5 m of the aircraft during the linking.

• The remote controller will automatically unlink from an aircraft if a new remote

controller is linked to the same aircraft.

• Turn o Bluetooth and Wi-Fi for optimal video transmission.

• Fully charge the remote controller before each ight. The remote controller sounds an

alert when the battery level is low.

• If the remote controller is powered on and not in use for five minutes, an alert will

sound. After six minutes, the remote controller automatically powers off. Move the

control sticks or press any button to cancel the alert.

• Fully charge the battery at least once every three months to maintain the battery’s

health.

• DO NOT operate the aircraft when the light condition is too bright or too dark using the

remote controller to monitor ight. User is responsible for the correct adjustment of

display brightness and shall take care of direct sunshine onto the screen during ight

operation.

Loading ...

Dji CPMA0000069301