Dji CPMA0000069301 Owner's Manual

Loading ...

DJI Air 3

User Manual

Gimbal and Camera

Gimbal Prole

The 3-axis gimbal stabilizes the camera, allowing you to capture clear and steady images and

videos at high ight speed. The gimbal has a control tilt range of -90˚ to +60˚ and a control pan

range of -5° to +5°.

Use the gimbal dial on the remote controller to control the tilt of the gimbal. Alternatively, do so

through the camera view in DJI Fly. Press and hold the screen until the gimbal adjustment bar

appears. Drag the bar up or down to control the tilt and left or right to control the pan.

Gimbal Operation Mode

Two gimbal operation modes are available. Switch between the dierent operation modes in DJI Fly.

Follow Mode:

the angle of the gimbal remains stable relative to the horizontal plane. Users can

adjust the gimbal tilt. This mode is suitable for shooting stills.

FPV Mode:

when the aircraft is ying forward, the gimbal synchronizes with the movement of

the aircraft to provide a rst-person ying experience.

• DO NOT tap or knock the gimbal after the aircraft is powered on. Launch the aircraft

from open and at ground to protect the gimbal during takeo.

• After installing the wide-angle lens, make sure the gimbal is level and forward before

takeo, so that the aircraft can correctly detect the installation status of the wide-angle

lens. The gimbal will be level when the aircraft is powered on, if the gimbal rotates,

recenter the gimbal using the remote controller or DJI Fly as follows:

a. Tap Recenter Gimbal on the Settings > Control page of DJI Fly.

b. Press the Fn button (DJI RC-N2) or the Customizable C1 Button (DJI RC 2) on the

remote controller. The default function is recentering the gimbal or pointing the

gimbal downward, which can be customized.

• Pano and Asteroid functions will not be available after the wide-angle lens is installed.

• Precision elements in the gimbal may be damaged by a collision or impact, which may

cause the gimbal to function abnormally.

• Avoid getting dust or sand on the gimbal, especially in the gimbal motors.

-90°

0°

60°

-5°

5°

Loading ...

Dji CPMA0000069301