Dji CPMA0000069301 Owner's Manual

Loading ...

DJI Air 3

User Manual

108

• The battery rmware is included in the aircraft rmware. Be sure to update all batteries.

• Make sure to follow all the steps to update the rmware, otherwise the update may fail.

• Make sure the computer is connected to the internet during the update.

• Before performing an update, make sure the Intelligent Flight Battery is at least 40%

charged and the remote controller is at least 20% charged.

• Do not unplug the USB-C cable during an update.

• The rmware update will take approximately 10 minutes. It is normal for the gimbal to

go limp, aircraft status indicators to blink, and the aircraft to reboot. Wait patiently until

the update is complete.

Visit the link below to refer to the Air 3 Release Notes for more rmware update information for

traceability.

https://www.dji.com/air-3/downloads

Post-Flight Checklist

• Make sure to perform a visual inspection so that the aircraft, remote controller, gimbal

camera, Intelligent Flight Batteries, and propellers are in good condition. Contact DJI support

if any damage is noticed.

• Make sure that the camera lens and vision system sensors are clean.

• Make sure to store aircraft correctly before transporting it.

Maintenance Instructions

To avoid serious injury to children and animals, observe the following rule:

1. Small parts, such as cables and straps, are dangerous if swallowed. Keep all parts out of

reach of children and animals.

2. Store the Intelligent Flight Battery and remote controller in a cool, dry place away from

direct sunlight to ensure the built-in LiPo battery does NOT overheat. Recommended

storage temperature: between 22° and 28° C (71° and 82° F) for storage periods of more

than three months. Never store in environments outside the temperature range of 14° to

113° F (-10° to 45° C).

3. DO NOT allow the camera to come into contact with or become immersed in water or

other liquids. If it gets wet, wipe dry with a soft, absorbent cloth. Turning on an aircraft that

has fallen in water may cause permanent component damage. DO NOT use substances

containing alcohol, benzene, thinners, or other ammable substances to clean or maintain

the camera. DO NOT store the camera in humid or dusty areas.

4. DO NOT connect this product to any USB interface older than version 3.0. DO NOT connect

this product to any “power USB” or similar devices.

5. Check every aircraft part after any crash or serious impact. If there are any problems or

questions, contact a DJI authorized dealer.

Loading ...

Dji CPMA0000069301