Loading ...
Loading ...
Loading ...
DJI Air 3
User Manual
40
©
2023 DJI All Rights Reserved.
2. Plan a Waypoint Flights
Tap
on the operation panel to set the parameters for the flight route such as Global
Speed, Camera, the behavior of End of Flight, On Signal Lost, and Start Point. The settings
apply to all waypoints.
Global Speed The default ight speed of the entire ight route. Drag the speed bar to
set the global speed.
Camera Select the camera which will perform the preset shooting actions during
the entire flight route: 1-3x (wide-angle camera) or 3-9x (medium tele
camera).
End of Flight The behavior of the aircraft after the flight task ends. It can be set to
Hover, RTH, Land, or Back to Start.
On Signal Lost The behavior of the aircraft when the remote controller signal is lost
during ight. It can be set to RTH, Hover, Land, or Continue.
Start Point After selecting the start waypoint, the ight route will be started from
this waypoint to the subsequent waypoints.
• Make sure to select the camera before pinning waypoints. If 1-3x (wide-angle
camera) is selected, the custom range of the zoom ratio for all waypoints on this
route is 1-3x. If 3-9x (medium tele camera) is selected, the custom range of the zoom
ratio for all waypoints on this route is 3-9x.
• When using Waypoint Flight in the EU, the behavior of the aircraft when the remote
controller signal is lost cannot be set to Continue.
3. Waypoint Settings
a. Pin Waypoint
Waypoints can be pinned via the map before takeo.
Waypoints can be pinned via the remote controller, operation panel, and map after
takeo. In this case, GNSS is required.
Loading ...
Loading ...
Loading ...