Loading ...
Loading ...
Loading ...
DJI Air 3
User Manual
82
©
2023 DJI All Rights Reserved.
Advanced Features
Calibrating the Compass
The compass may need to be calibrated after the remote controller is used in areas with
electromagnetic interference. A warning prompt will appear if the compass of the remote
controller requires calibration. Tap the warning prompt to start calibrating. In other cases,
follow the steps below to calibrate the remote controller.
1. Power on the remote controller, and enter Quick Settings.
2. Select System Settings
, scroll down, and tap Compass.
3. Follow the on-screen instructions to calibrate the compass.
4. A prompt will be displayed when the calibration is successful.
DJI RC-N2
The DJI RC-N2 remote controller features O4 video transmission when used with DJI Air 3, works
at 2.4 GHz, 5.8 GHz and 5.1 GHz frequency bands. The remote controller is capable of selecting
the best transmission channel automatically and can transmit 1080p 60fps HD live view from
the aircraft to DJI Fly on a mobile device (depending on mobile device performance) at a
maximum transmission range of 20 km (12.4 mi) (compliant with FCC standards, and measured
in a wide open area without interference). Users can control the aircraft and change the settings
easily within this range.
The built-in battery has a capacity of 5200 mAh and power of 18.72 Wh that supports a
maximum run time of six hours (when not charging the mobile device).
• 5.1 GHz can be used only in countries and regions where it is permitted by local laws
and regulations.
Operation
Powering On/O
Press the power button once to check the current battery level. If the battery level is too low,
recharge before use.
Press once then press again and hold for two seconds to power the remote controller on or o.
Loading ...
Loading ...
Loading ...