Loading ...
Loading ...
Loading ...
DJI Air 3
User Manual
56
©
2023 DJI All Rights Reserved.
90°
90°
90°
90°
90°
90°
0.5-18 m
0.5-30 m
0.5-30 m
90°
90°
0.3-14 m
0.5-18 m
90°
0.5-18 m
106°
106°
72°
72°
90° 90°
72° 72°
72°
72°
Using the Vision Systems
The positioning function of the downward vision system is applicable when GNSS signals are
unavailable or weak. It is automatically enabled in Normal or Cine mode.
The omnidirectional vision system will activate automatically when the aircraft is in Normal
or Cine mode and Obstacle Avoidance is set to Bypass or Brake in DJI Fly. The omnidirectional
vision system works best with adequate lighting and clearly marked or textured obstacles. Due
to inertia, users must make sure to brake the aircraft within a reasonable distance.
• Pay attention to the ight environment. The vision systems and the three-dimensional
infrared sensing system only work in certain scenarios and cannot replace human
control and judgment. During a flight, always pay attention to the surrounding
environment and the warnings in DJI Fly, and be responsible for and maintain control of
the aircraft at all times.
• The downward vision system works best when the aircraft is at an altitude from 0.5 to
30 m if there is no GNSS available. Extra caution is required if the altitude of the aircraft
is above 30 m as the vision positioning performance may be aected.
• In low-light environments, the vision systems may not achieve optimal positioning
performance even if the auxiliary light is turned on. Fly with caution if the GNSS signal is
weak in such environments.
• The downward vision system may not work properly when the aircraft is flying near
water. Therefore, the aircraft may not be able to actively avoid water below it when
landing. It is recommended to maintain flight control at all times, make reasonable
judgments based on the surrounding environment, and avoid over-relying on the
downward vision system.
60°
60°
0.1-8 m
Loading ...
Loading ...
Loading ...