Dji CPMA0000069301 Owner's Manual

Loading ...

DJI Air 3

User Manual

Stopping the Motors

When the aircraft is on the ground and the motors are spinning, there are two ways to stop the

motors:

Method 1:

When the aircraft has landed, push the throttle stick down and hold until the

motors stop.

Method 2:

When the aircraft has landed, perform the same CSC used to start the motors until

the motors stop.

Stopping the Motors Mid-Flight

Stopping the motors mid-ight will cause the aircraft to crash. The default setting for Emergency

Propeller Stop in the DJI Fly app is Emergency Only, which means that the motors can only

be stopped mid-flight when the aircraft detects that it is in an emergency situation such as

the aircraft is involved in a collision, a motor has stalled, the aircraft is rolling in the air, or the

aircraft is out of control and is ascending or descending very quickly. To stop the motors mid-

ight, perform the same CSC that was used to start the motors. Note that the user needs to

hold the control sticks for two seconds while performing the CSC to stop the motors. Emergency

Propeller Stop can be changed to Anytime in the app by users. Use this option with caution.

Method 1 Method 2

Starting/Stopping the Motors

Starting the Motors

Perform the Combination Stick Command (CSC) as shown below to start the motors. Once the

motors have started spinning, release both sticks simultaneously.

Loading ...

Dji CPMA0000069301