Loading ...
Loading ...
Loading ...
DJI Air 3
User Manual
52
©
2023 DJI All Rights Reserved.
• If the aircraft reaches the altitude limit of the aircraft current location or of the Home
Point while it is ascending during Straight Line RTH, the aircraft stops ascending and
returns to the Home Point at the current altitude. Pay attention to ight safety during
RTH.
• The aircraft will bypass any GEO zones encountered when it is ying forward during
Straight Line RTH. Pay attention to ight safety during RTH.
• The aircraft will exit RTH if the surrounding environment is too complex to complete
RTH, even if the vision systems are working properly.
Low Battery RTH
When the Intelligent Flight Battery level is too low and there is not enough power to return
home, land the aircraft as soon as possible.
To avoid unnecessary danger caused by insucient power, the aircraft automatically calculates
if the battery power is sucient to return to the Home Point according to the current position,
environment, and ight speed. A warning prompt will appear in DJI Fly when the battery level is
low and only enough to complete an RTH ight. The aircraft will automatically y to the Home
Point if no action is taken after a 10-second countdown.
The user can cancel RTH by pressing the RTH button on the remote controller. A low battery
level warning will be prompted only once during a flight. If RTH is canceled following the
warning, the Intelligent Flight Battery may not have enough power for the aircraft to land safely,
which may lead to the aircraft crashing or being lost.
The aircraft will land automatically if the current battery level can only support the aircraft long
enough to descend from its current altitude. Auto landing cannot be canceled, but the remote
controller can be used to control the horizontal movement and the descent speed of the aircraft
during landing. If there is sucient power, the throttle stick can be used to make the aircraft
ascend at a speed of 1 m/s.
During auto landing, move the aircraft horizontally to nd an appropriate place to land as soon
as possible. The aircraft will fall if the user keeps pushing the throttle stick upward until the
power is depleted.
Failsafe RTH
The action of the aircraft when the remote controller signal is lost can be set to RTH, land, or
hover in Setting > Safety > Advanced Safety Settings in DJI Fly. If the Home Point was successfully
recorded and the compass is functioning normally, Failsafe RTH automatically activates after
the remote controller signal is lost for more than six seconds.
When the lighting is sucient and the vision systems are working normally, DJI Fly will display
the RTH path that was generated by the aircraft before the remote controller signal was lost.
The aircraft will start RTH using Advanced RTH according to the RTH settings. The aircraft will
remain in RTH even if the remote controller signal is restored. DJI Fly will update the RTH path
accordingly.
When the lighting is not sucient and the vision systems are not available, the aircraft will enter
Original Route RTH.
Loading ...
Loading ...
Loading ...