Dji CPMA0000069301 Owner's Manual

Loading ...

DJI Air 3

User Manual

4. Overcharge Protection: the battery stops charging automatically once fully charged.

5. Temperature Detection: to prevent damage, the battery only charges when the temperature

is between 5° and 40° C (41° and 104° F).

6. Overcurrent Protection: the battery stops charging if an excess current is detected.

7. Over-Discharge Protection: discharging stops automatically to prevent excess discharge

when the battery is not in use. Over-discharge protection is not enabled when the battery is

in use.

8. Short Circuit Protection: the power supply is automatically cut if a short circuit is detected.

9. Battery Cell Damage Protection: the app will display a warning prompt when a damaged

battery cell is detected.

10. Hibernation Mode: the battery switches off after 5 to 20 seconds of inactivity to save

power. If the battery level is less than 5%, the battery enters Hibernation mode to prevent

over-discharge after being idle for six hours. In Hibernation mode, the battery level LEDs

do not illuminate when the power button is pressed. Charge the battery to wake it from

hibernation.

11. Communication: information about the voltage, capacity, and current of the battery is

transmitted to the aircraft.

12. Maintenance Instructions: the battery automatically checks the voltage dierences between

battery cells and decides whether maintenance is required. If maintenance is required,

the four battery level LEDs will blink twice every second and blink for two seconds when

the user presses the power button to check the battery level. In this case, if the battery

is inserted into the aircraft and powered on, the aircraft will not be able to take off,

and a prompt for maintenance will appear in DJI Fly. If the battery level LEDs blink for

maintenance or the maintenance prompt appears in DJI Fly, follow the prompt to fully

charge the battery and then let it rest for 48 hours. If the battery still does not work after

two times of maintenance, contact DJI Support.

• Refer to the Safety Guidelines and the stickers on the battery before use. Users take full

responsibility for any violations of the safety requirements stated on the label.

Using the Battery

Checking the Battery Level

Press the power button once to check the battery level when the battery is powered o.

LED4

Power Button

LED1

LED2

LED3

Loading ...

Dji CPMA0000069301