Loading ...
Loading ...
Loading ...
SDS5000X Series Digital Oscilloscope User Manual
9 / 236 W W W . S I G L E N T . C O M
to equipment measuring terminals that are connected to source circuits in
which measures are taken to limit transient voltages to an appropriately low
level.
Degree of Pollution II refers to a working environment which is dry and non-
conductive pollution occurs. Occasional temporary conductivity caused by
condensation is expected.
Degree of Protection I refers to grounded equipment, in which protection
against electric shock is achieved by basic insulation and by means of a
connection to the protective ground conductor in the building wiring.
CAUTION: Protect the display touch screen of the scope from
excessive impact.
CAUTION: Do not exceed the maximum specified front panel terminal
(CH1, CH2, CH3, CH4, EXT) voltage levels. Refer to Specifications for
more details.
CAUTION: Do not connect or disconnect probes or test leads while
they are connected to a voltage source.
2.3 Cooling Requirements
This instrument relies on the forced air cooling with internal fans and
ventilation openings. Care must be taken to avoid restricting the airflow
around the apertures (fan holes) at each side of the scope. To ensure
adequate ventilation it is required to leave a 15 cm (6 inch) minimum gap
Loading ...
Loading ...
Loading ...