Loading ...
Loading ...
Loading ...
SDS5000X Series Digital Oscilloscope User Manual
101 / 236 W W W. S I G L E N T. C O M
15.5.10 Pattern Trigger
The Pattern trigger identifies a trigger condition by looking for a specified pattern.
The SDS5000X provides 4 patterns: logical AND, OR, NAND and NOR
combination of the channels. Each channel can set to "Low", "High" or "Don't
Care". If all channels are set to "Don’t Care", the oscilloscope will not trigger.
Logic (AND, OR, NAND, NOR), source, limit range and time value can be set
in the trigger dialog box. When the logic is "OR" or "NAND", the setting of time
limit is invalid.
Source Setting
Touch the Source Setting area to recall the following dialog box and set up for
each channel separately. Each channel can be set to "Low", "High" or "Don't
Care". The threshold can be determined by setting the Level Value.
When digital channels are turned on, the logic state of the digital channel can
also be set in the source setting dialog box.
Loading ...
Loading ...
Loading ...