Loading ...
Loading ...
Loading ...
SDS5000X Series Digital Oscilloscope User Manual
34 / 2 3 6 W W W. S I G L E N T. C O M
on medium to high frequency signals. See the datasheet for details of
the cut-off frequency.
Trigger mode
Auto: The oscilloscope will sweep without a set trigger. An internal timer
triggers the sweep after a preset timeout period so that the display
refreshes continuously. This is helpful when first analyzing unknown
signals. Otherwise, Auto functions the same as Normal when a trigger
condition is found.
Normal: Sweeps only if the input signal meets the trigger condition.
Otherwise it continues to display the last acquired waveform.
Stop: Stops the acquisition and displays the last acquired waveform.
Trigger level: The source voltage level or levels that mark the threshold for the
trigger to fire. Trigger levels specified in Volts normally remain unchanged when
the vertical gain or offset is modified.
Trigger type: See the chapter "Trigger" for details.
Loading ...
Loading ...
Loading ...