Loading ...
Loading ...
Loading ...
55
NOTE
This function will require the sensor ID be inputted on the screen.
The sensor IDs can be read directly from the sensor or by using a sensor activation
tool that can read the ID.
Once the IDs have been entered, the vehicle may have to be driven at a certain
speed for a certain time to complete procedure. Follow the instructions displays.
Figure 5-30 Sample Tire Pressure Sensor Replacement Screen
1. Tap Front left wheel sensor on the tire pressure sensor replacement menu.
2. Enter the 8 digit sensor identification as required. Press OK.
Figure 5-31 Sample Sensor ID Input Screen
3. Continue to select tire position and enter sensor IDs. A message will display when
the entered IDs have been registered to the vehicle.
NOTE
The vehicle must remain stationary for at least 15 minutes with the ignition off, this will
place the sensors into sleep mode. The vehicle must be driven for at least 15 minutes
at a speed higher than 20 kph to ensure the module has learned the sensor
identifications and positions.
Loading ...
Loading ...
Loading ...