Autel MaxiCOM MK808Z User Manual

Loading ...

4.5.2.7 Vehicle Status

This item is used to check the current condition of the vehicle, including communication

protocols of OBDII modules, amount of codes, status of the Malfunction Indicator Light

(MIL), and additional information.

Exiting Diagnostics

The Diagnostics application remains open as long as there is active communication with

the vehicle. You must exit the diagnostics operation to stop all communications with the

vehicle before closing the Diagnostics application.

NOTE

Damage to the vehicle electronic control module (ECM) may occur if communication

is disrupted. Make sure all connections, such as USB cable and wireless connections,

are properly connected at all times during testing. Exit all tests before disconnecting

the test connection or powering down the tool.

 To exit the Diagnostics application

1. From an active diagnostics screen, tap the Back or ESC function button to exit

a diagnostics session step-by-step.

2. Or tap the Vehicle Swap button on the diagnostics toolbar to return to the

Vehicle Menu screen.

3. From the Vehicle Menu screen, tap the Home button on the top toolbar; or tap

the Back button on the navigation bar at the bottom of the screen.

4. Or tap the Home button on the diagnostics toolbar to exit the application directly

and return to the MaxiCOM Job Menu.

Once the Diagnostics application is no longer communicating with the vehicle, it is safe

to open other MaxiCOM applications, or exit the MaxiCOM Diagnostics System and

return to the Android System’s Home screen.

Loading ...

Autel MaxiCOM MK808Z Car Diagnostic Scan Tool - Android 11 & Bi-Directional Control Scanner