Loading ...
Loading ...
Loading ...
22
4.4.1.1 Navigation Bar
List Tab — displays the scanned data in list format.
Progress Bar — indicates the test progress.
4.4.1.2 Main Section
Column 1 — displays the sequence numbers.
Column 2 — displays the scanned systems.
Column 3 — displays the diagnostics indicators describing test results.
These indicators are defined as follows:
-!-: Indicates that the scanned system may not support the code reading function,
or there is a communication error between the tablet and the control system.
-?-: Indicates that the vehicle control system has been detected, but the tablet
cannot accurately locate it.
Fault(s) | #: Fault(s) indicates there is/are detected fault code(s) present; “#”
indicates the number of the detected faults.
Pass | No Fault: Indicates the system has passed the scanning process and no
fault has been detected.
Column 4 — to perform further diagnosis or testing on a specific system item, tap
the
○
> button to the right of that item. A Function Menu screen will display.
4.4.1.3 Function Buttons
A brief description of the operations of the Auto Scan’s Function Buttons’ are displayed
in the table below.
Table 4-3 Function Buttons in Auto Scan
Name
Description
Report
Displays the diagnostics data in the report form.
Quick
Deletes codes. A warning message screen will display to
inform you of possible data loss when this function is
selected.
OK
Confirms the test result. Continues to the system
diagnosis after the required system is selected by
tapping the item in the Main Section.
Pause
Suspends scanning and it will change to Continue
button after tapped.
ESC
Returns to the previous screen or exits Auto Scan.
Loading ...
Loading ...
Loading ...