Loading ...
Loading ...
Loading ...
30
threshold lines are shown in different colors from the waveform of the parameters for
distinction.
Record Button — displays the configuration screen for Record Setting, on
which you can set the trigger type, duration and trigger point for the data
recording function.
a) Trigger Type — sets the trigger mode for data recording, mainly of two
kinds: Manual and Auto. There are four options available:
1) Manual — allows you to manually start and stop data recording
2) DTC — auto triggers data recording when any DTC is detected
3) DTC Check Mode — auto triggers data recording when certain pre-
selected DTC types are detected
4) Parameter — auto triggers data recording when any parameter value
reaches the preset threshold
b) Duration — sets the recording time (for Auto trigger mode only)
c) Trigger Point — reserves a relative percentage of a record length before
the data recording start point for reference (for Auto trigger mode only)
To perform setting for live data record
1. Tap the Setting function button at the bottom of the Live Data screen.
2. Tap the Record navigation button.
3. Tap the
○
> button on the right of Trigger Type bar and select the required
trigger mode.
4. Tap the
○
> button on the right of Duration bar and select a length of time.
5. Tap the
○
> button on the right of Trigger Point bar and select a relative
percentage of a record length to be reserved before the data recording start
point.
6. Tap Done to save the setting and return to the Live Data screen; or tap Cancel
to cancel without saving and exit Setting.
Done Button - confirms and saves the setting, and returns you to the Live Data
screen.
Cancel Button — cancels the setting operation, and returns you to the Live
Data screen.
4.4.2.4 Active Test
The Active Test function is used to access vehicle-specific subsystem and component
tests. Available tests vary depending on the manufacturer, year, and model.
During an active test, the tablet sends commands to the ECU in order to drive the
actuators. This test determines the integrity of the system or parts by reading the engine
ECU data, or by monitoring the operation of the actuators. Such tests may include
toggling between two positions of a solenoid, relay or switch.
Loading ...
Loading ...
Loading ...