Loading ...
Loading ...
Loading ...
27
To change the unit mode, tap the Setting button on the top toolbar and select a required
mode. See Unit for more information.
Display Mode
There are four types of display modes available for data viewing, allowing you to view
various types of parameters in the most suitable way.
Tapping the drop-down button on the right side of the parameter name to open a sub
menu. There are four buttons to configure the data display mode, and a Help button for
access to additional information.
Each parameter item displays the selected mode independently.
1) Analog Gauge Mode — displays the parameters in form of an analog meter graph.
2) Text Mode — this is the default mode that displays the parameters in texts and
displays in list format.
NOTE
Reading of status parameters, such as a switch reading, which are mostly in word form,
such as ON, OFF, ACTIVE, and ABORT, can only be displayed in Text Mode. Whereas
reading of value parameters, such as a sensor reading, can be displayed in text mode
and other graph modes.
3) Waveform Graph Mode — displays the parameters in waveform graphs.
When this mode is applied, three control buttons will display on the right side of the
parameter item, allowing you to manipulate the display status.
Text Button — resumes Text Display Mode.
Scale Button — changes the scale values, which are displayed below the
waveform graph. There are four scales available: x1, x2, x4 and x8.
Zoom-in Button — tap once to display the selected data graph in full screen.
Edit Button — tap this button to open an edit window, on which you can set
the waveform color and the line thickness displayed for the selected
parameter item.
Scale Button — changes the scale values, which are displayed below the
waveform graph. There are four scales available: x1, x2, x4 and x8.
Zoom-out Button — exits full screen display.
4) Digital Gauge Mode — displays the parameters in form of a digital gauge graph.
Full Screen Display — this option is only available in the waveform graph mode, and
mostly used in Graph Merge status for data comparison. There are three control buttons
available on the top right side of the screen under this mode.
To edit the waveform color and line thickness in a data graph
1. Select 1 to 3 parameter items to display in Waveform Graph mode.
2. Tap the Zoom-in Button on the right to display the data graph in full screen.
3. Select a parameter item on the left column.
Loading ...
Loading ...
Loading ...