Loading ...
Loading ...
Loading ...
42
Figure 5-7 Sample EMF Star-up Screen 2
3) A screen will display to remind you that the fault memory of the parking brake control
unit will be deleted, press Continue to proceed or the Back button to exit.
Figure 5-8 Sample EMF Star-up Screen 3
4) Follow the on-screen instructions to pull the parking brake button and wait for around
3 seconds until the parking brake is set. When the operation is successfully
completed, a “Completed successfully” message will display on the screen. Press
OK to exit.
5.2.2.1 Parking Brake: Workshop Mode
This service is used to activate and deactivate the so-called installation position for the
Automatic Hold brake. In this mode, the parking brake is moved into the opened position
and temporarily deactivated for personal protection.
The installation position must be activated for the following repairs:
Replacement of brake pads.
Replacement of a brake caliper.
Replacement of an actuator.
Select Parking Brake: Workshop Mode and follow the on-screen instructions to
perform a series of operations to start the brake pad after replacement.
Loading ...
Loading ...
Loading ...