Loading ...
Loading ...
Loading ...
29
Figure 4-14 Sample Setting Mode in Live Data
There are four navigation buttons on top of the Setting mode screen.
Selected Button — displays the configuration screen on which you can set the
threshold values, an upper limit and a lower limit, for triggering the buzzer alarm.
This function only applies to the Waveform Graph display mode.
a) MIN — tap to open a virtual keyboard, allowing you to enter the required
lower limit value.
b) MAX — tap to open a virtual keyboard, allowing you to enter the required
upper limit value.
c) Buzzer Alarm — switches the alarm on and off. The alarm function beeps
as a reminder whenever the data reading reaches the pre-set minimum or
maximum point.
To set threshold limits for the parameter values
1. Tap the Setting function button at the bottom of the Live Data screen.
2. Tap the Selected navigation button.
3. Select a parameter item on the left column, or enter the item name in the
Search bar.
4. Tap on the right side of the MIN button, and enter the required minimum value.
5. Tap on the right side of the MAX button, and enter the required maximum value.
6. Tap the ON/OFF button on the right side of the Buzzer Alarm button to turn it
on or off.
7. Tap Done to save the setting and return to the Live Data screen; or tap Cancel
to exit without saving.
If the threshold limits are successfully set, two horizontal lines will appear on each of the
data graphs (when Waveform Graph Mode is applied) to indicate the alarming point. The
Loading ...
Loading ...
Loading ...