Autel MaxiCOM MK808Z User Manual

Loading ...

NOTE

 AUTEL accepts no responsibility for any accident or injury arising from servicing the

SAS system. When interpreting DTCs retrieved from the vehicle, always follow the

manufacturer’s recommendation for repair.

 All software screens shown in this manual are examples, actual test screens may

vary for each vehicle being tested. Observe the menu titles and on-screen instructions

to make correct option selections.

 Before starting the procedure, make sure the vehicle has an ESC button. Look for

the button on dash.

Using Land Rover as an example.

1. Tap the Service application button from the MaxiCOM Job Menu.

2. Tap SAS button and wait for the vehicle manufacturer screen. You can tap VIN Scan

or the vehicle manufacturer to acquire vehicle VIN information and tap Yes to confirm.

See Vehicle Identification for details.

3. Tap the needed service in the SAS function list. The list may vary by vehicle.

Figure 5-18 Sample SAS Function Menu

Steering Angle Sensor Calibration

This function allows users to perform steering angle sensor calibration and clear records.

Available function options vary by vehicle.

1. Tap Steering Angle Sensor Calibration from the SAS function menu to enter the

function screen.

2. Follow the on-screen instructions to set the ignition on/off as guided. The vehicle

battery voltage signal should be in the range 12.5 – 13.5 volts to proceed with this

service, otherwise the scan tablet will display a warning message.

3. Make sure the steering wheel is in the center position and the front wheels are

straight. Then tap OK to proceed.

Loading ...

Autel MaxiCOM MK808Z Car Diagnostic Scan Tool - Android 11 & Bi-Directional Control Scanner