Loading ...
Loading ...
Loading ...
Routing the Aux Output using the Built in Control Panel
To select a source for the auxiliary output:
1 Press the button labeled AUX on the control panel.
The buttons will illuminate white to let you know you are in the auxiliary output
selection mode.
2 Press a source button to route that source to the auxiliary output. This is a clean switch
so you can even use this mode as a second 'cut only' switcher if you want to.
3 Once you have selected the auxiliary output source, press the aux button again to exit
the auxiliary output selection mode and return to normal switching.
TIP Sources that aren't available on the control panel, for example clean feed, can be
selected in the auxiliary source LCD menu.
Press the AUX button and select a source for the auxiliary output using
the control panel buttons or via the auxiliary source LCD menu)
Routing the Aux Output using ATEM Software Control
ATEM Software Control has an auxiliary output setting in the menu bar at the top of the screen.
All you need to do is click on the ‘auxiliary 1’ setting and scroll through the drop down list to
select the source you want to output. When selected, the auxiliary output will change
immediately. You can see the currently selected source with a tick in the menu item.
List of Auxiliary Output Sources)
147Using the Auxiliary Output
Loading ...
Loading ...
Loading ...