Loading ...
Loading ...
Loading ...
Upstream Key Example
Example 1
In this example the upstream keyer is not currently on air. The next transition has KEY 1 TIE
selected, therefore the next transition will change the state of key 1 and turn it on so that it is
visible on the program output. On ATEM Software Control, the corresponding KEY 1 next
transition button will also illuminate.
Program output after transition.Program output before transition. Control panel next
transition buttons
before transition.
Example 2
In this example, key 1 is currently on air, indicated by the illuminated KEY 1 CUT button. The next
transition has KEY 1 TIE selected, therefore the next transition will change the state of key 1 and
turn it off so that it is not visible on the program output.
Program output after transition.Program output before transition. Control panel next
transition buttons
before transition.
Example 3
In this example, key 1 is on-air, indicated by the illuminated KEY 1 CUT button.
The BKGD and KEY 1 TIE next transition buttons are selected, therefore the background and the
upstream key are tied to the next transition. The next transition will transition the background
and change the state of key 1 turning it off so that it is not visible on the program output.
Program output after transition.Program output before transition. Control panel next
transition buttons
before transition.
143Keying using ATEM Switchers
Loading ...
Loading ...
Loading ...