Loading ...
Loading ...
Loading ...
User’s Manual
IV
Installation Requirements
WARNING
Do not connect the boom gate to the power adapter when the adapter is powered on.
Strictly comply with the local electrical safety codes and standards. Make sure that the ambient
voltage is stable and meets the power supply requirements.
Do not connect the boom gate to 2 or more kinds of power supplies, to avoid safety risks and
damage to the boom gate.
Use accessories suggested by the manufacturer, and install and maintain the boom gate by
professionals.
When using a laser beam device, avoid exposing the surface of the boom gate to laser beam
radiation.
Personnel working at heights must take all necessary measures to ensure personal safety
including wearing a helmet and safety belts.
Do not install or place the boom gate in a location that exposes it to sunlight or heat sources.
Keep the boom gate away from dampness, dust or soot.
Install the boom gate in well-ventilated places, and do not block its vent.
Use an adapter or cabinet power supply from the manufacturer.
Make sure that the power supply meets the SELV (Safety Extra Low Voltage) requirements and
rated voltage conforms to the GB8898 (IEC60065) or GB4943.1 standard (IEC60950-1 or
IEC62368-1 complies with Limited Power Source). The requirements of the power supply are
subject to the device labels.
Loading ...
Loading ...
Loading ...