Loading ...
Loading ...
Loading ...
User’s Manual
10
Install the straight boom gate Figure 3-3
Table 3-2 Straight boom gate description
No. Description No. Description
1 M12 × 70 outer hexagon screw 3 Handle connector
2 Plate for boom handle — —
3.3.2 Telescopic Boom Gate
The procedure for installing a telescopic boom gate is the same as that of installing the straight
boom gate. For details, see "3.3.1 Straight Boom Gate".
3.3.3 Folding Boom Gate
Follow Step 1–Step 3 in "3.3.1 Straight Boom Gate". Step 1
Install the bearing on the support plate, and then secure the bearing with screws. Step 2
Loosen the 2 ends of the cast aluminum casing, rotate the stainless steel tube, and adjust Step 3
the horizontal and vertical directions of the boom respectively. After it has been adjusted,
tighten the 2 ends of the cast aluminum casing.
Loading ...
Loading ...
Loading ...