Loading ...
Loading ...
Loading ...
User’s Manual
24
Error Code Reason
Er. 7 Alarm when someone rises the boom manually.
3.4.2.4 LED Message Display
Table 3-10 LED message display
Message Description
IdLE
The plug of the motor sensor is not inserted or the motor sensor fails, which might be
caused by loosen cable.
STOP The boom gate stops working.
cLOS The boom gate is closing.
OPEN The boom gate is opening.
HOLd The boom gate is opened.
LocK The boom gate is locked, and it enters the fleet mode.
uPxx xx is the number of opening times after enabling the counting function.
dxxx
The time that auto delays in closing the boom gate. xxx refers to the countdown time
(only displays after enabling the auto delay in closing function).
Fcxx Software version. xx refers to the version. The larger the value, the newer the version.
Loxx Automatically open the boom gate in low voltage. xx refers to the H-47 value.
Value
The running times of the boom gate. If less than 100,000 times, the entire number
will be displayed; if more than 100,000 times, the number will be replaced by "_". For
example, 23_ means 230,000 times.
Adjusting Spring Balance 3.5
The spring of boom gate is adjusted by default.
Do not change the boom and adjust the boom length.
The spring length is for reference only.
The spring is a wear part, and you need to maintain and replace it regularly.
Select the spring. Step 1
Table 3-11 Select spring
Boom Type Boom Length L (m) Spring Cable Diameter (mm) Remarks
Straight Boom with
Rubber Strip
6 ≥ L > 5.3 Φ6.0 + Φ4.5
Cable color.
Φ4.5 spring:
red
Φ5.5 spring:
blue
Φ6.0 spring:
green
Φ6.8 spring:
Straight Boom with
Rubber Strip
5.3 ≥ L ≥ 4.3 Φ5.5 + Φ4.5
Straight Boom with
Rubber Strip
4.3 > L ≥ 3.5 Φ4.5 + Φ4.5
Straight Boom with
Rubber Strip
3.5 > L ≥ 3 Φ5.5
Loading ...
Loading ...
Loading ...