Loading ...
Loading ...
Loading ...
User’s Manual
18
1) After entering the menu, set the speed for learning the up limit first. The LED displays
"1-XX" (XX refers to the speed for learning the up limit). You can press the Open and
Close buttons to adjust the speed.
2) After setting the speed for learning the up limit, press Settings, and the LED displays
"2-XX" (XX refers to the speed for learning down limit). You can press the Open and
Close buttons to adjust the speed.
3) After setting the speeds, press Settings to save the configurations.
The settings do not take effect if you press Stop.
When manually adjusting the limit, the system learns the limits at the speed of 1-XX.
F-15 sensitivity of boom
While it is closing, if the boom is obstructed from moving for longer than the defined time, it
will open. Er.ob (see "3.4.2.3 Error Code") will be displayed on the LED.
3.4.2.2 Advanced Menu
Advanced Settings
Press and hold the Settings and Stop buttons for 2 seconds at the same time to go to the advanced
menu. The LED displays H-XX.
Advanced menu is for professionals and technical personnel.
Do not modify the items that are not listed in the table below, to avoid causing the boom gate
to malfunction.
Table 3-7 Some of the advanced menu items
Menu Function Default Range Description
H-02 Quick commissioning. — — See Advanced Settings Details.
H-03
Automatic delay closing
after a vehicle passes.
0 0–255
The boom gate automatically delays
closing by the defined time after the
vehicle passes. Unit: seconds.
H-07 Counting function. 1 0–10
Calculates the running times of the
boom gate. When it is set to 1, the
boom gate opens and closes after a
vehicle passes.
H-08 Automatic test. 0 0–5
Automatic aging test interval. 0 means
no automatic aging test, 2 means test
every 2 seconds. Unit: seconds.
H-09
Restores to its factory
default settings.
0 0–255
10: Restores to its factory default
settings.
H-17
The traffic light changes
when the boom opens
to the defined angle.
60 0–90
The red traffic light turns green when
the boom gate opens to the defined
angle.
Loading ...
Loading ...
Loading ...