Loading ...
Loading ...
Loading ...
User’s Manual
14
Table 3-5 Controller port description
No. Description No. Description
1 Fuse. 2 24 VDC power input.
3
RS-
485 communication interface.
Connects to the RS-485 port of the
access control camera through a
twisted pair cable, so that the
camera can obtain the working
status, fault code and log of the
boom gate.
4 Bluetooth mode interface (optional).
5
12 VDC power input.
Outputs a maximum of 12 VDC and
1 A current, to supply power to the
radar or IR anti-smashing device.
6 Multiplying relay output interface.
7 IR photocell signal input. 8 Loop detecton and radar signal input.
9 GND (COM). 10 GND (COM).
11 Open. 12 Close.
13 Stop. 14 Wire control indicator.
15
Wire control interface.
Used to
connect the boom gate to the
parking system, or to connect the
external button switches to control
the boom gate.
Open the boom gate: Short
Open and GND.
Close the boom gate: Short
Close and GND.
Stop the boom gate: Short
Stop and GND.
16
Anti-smashing interface.
Anti-smashing by IR sensor: Used when
closing the boom gate, short IR and GND
to open the boom gate.
Anti-smashing by coil:
Used when
closing the boom gate, short coil or radar
and GND to open the boom gate. After
the boom gate is opened,
it will
automatically close when the coil or
radar and GND are disconnected.
Loading ...
Loading ...
Loading ...