Siglent REFL-SSA3000X Manual

Loading ...

SIGLENT

SSA3000X User Manual 68

3. Switch on the analyzer

4. Press button on the front panel System →Interface→LAN to enter the LAN Config

function menu.

5. Select the IP Config between Static and DHCP

◆ DHCP: the DHCP server in the current network will assign the network parameters

automatically (IP address, subnet mask, gate way) for the analyzer.

◆ Static: you can set the IP address, subnet mask, gate way manually. Press Apply.

The analyzer will be detected automatically or manually as a new LAN point.

3.1.3 Connecting the Analyzer via the USB Host port

Refer to the following steps to finish the connection via USB:

1. Install NI-VISA on your PC for GPIB driver.

2. Connect the analyzer USB Host port to a PC’s GPIB card port, with SIGLENT

USB-GPIB adaptor.

3. Switch on the analyzer

4. Press button on the front panel System→Interface→GPIB to enter the GPIB number.

The analyzer will be detected automatically as a new GPIB point.

Loading ...

Siglent REFL-SSA3000X Reflect Measurement Software for SSA3000X Series Spectrum Analyzers