Loading ...
Loading ...
Loading ...
SIGLENT
SSA3000X User Manual 47
2.3.4.1 Peak -> CF
Execute peak search and set the center frequency of the analyzer to the frequency of the peak.
2.3.4.2 Next Peak
Search for and mark the peak whose amplitude is closest to that of the current peak and which meets
the peak search condition.
2.3.4.3 Next Left Peak
Search for and mark the nearest peak which is located at the left side of the current peak and meets the
peak search condition.
2.3.4.4 Next Right Peak
Search for and mark the nearest peak which is located at the right side of the current peak and meets
the peak search condition.
2.3.4.5 Peak Peak
Execute peak search and minimum search at the same time and mark the results with delta pair
markers. Wherein, the result of peak search is marked with the delta marker and the result of minimum
search is marked with the reference marker.
2.3.4.6 Count Peak
Enable or disable continuous peak search and the default are Off. When enabled, the system will
always execute a peak search automatically after each sweep in order to track the signal under
measurement.
2.3.4.7 Peak Table
Open the peak table (in the lower window) which lists the peaks (with frequency and amplitude) that
meet the peak search condition. Up to 16 peaks can be displayed in the table.
2.3.4.8 Search Comfit
Define the conditions of peak search for various peak searches. A real peak should meet the
requirements of both the “Peak Excursion” and “Peak Threshold”.
Loading ...
Loading ...
Loading ...