Loading ...
Loading ...
Loading ...
SIGLENT
SSA3000X User Manual 61
An external U disk has the priority to be written in first.
1. STA(Status)
STA files can be used to save and recall the instrument configuration. They are saved in binary
format, which is designed to be used by the analyzer, not read by humans.
2. TRC(Trace)
TRC files store the active (visible) trace data and scaling factors that were in place when the data
was saved. They are saved in binary format, which is designed to be used by SSA3X instruments,
not read by humans.
NOTE: When you first recall trace files, the instrument will adjust the display parameters
(horizontal and vertical scaling, for example) to match the settings used during data collection. The
trace data will not change, even if you adjust the parameters.
3. COR(Correction)
COR files store the data used to mathematically adjust the displayed input signal based on
external factors (Cable loss, Amplifier/Antenna gain, etc.). They are saved in ASCII format, which
can be read by humans.
4. CSV(Comma-Separated Variable)
CSV files store instrument configuration (scaling, units, etc..) and raw data (amplitude and
frequency values) in ASCII format, commonly viewed in spreadsheet programs like Microsoft
®
Excel
®
. This file type can be read by humans.
5. LIM(limit)
LIM files store the line or point data used to configure and display lines used for visual indication of
a user-defined limit. This is a binary file intended for use with SSA3X instruments and is not
readable by humans.
6. BMP(Bitmap)/JPG(JPEG)/PNG
Picture files capture the display of the instrument (screenshot) as an image file. All of the details of
the display are captured exactly. What you see on the display is in the file. These are readable
using image programs.
2.5.3.6 Create Folder
Create a new folder in current directory.
2.5.3.7 Operate
Open/Load: Open the selected folder or directory, Load the selected file.
Select All: Select all the files in current directory
Cut: Cut the Selected file or folder, and delete the primary one after paste.
Copy: Copy the Selected file or folder for paste.
Loading ...
Loading ...
Loading ...