Siglent REFL-SSA3000X Manual

Loading ...

SIGLENT

SSA3000X User Manual 34

2.2.6 Limit

The analyzer supports Pass/Fail test function. In this function, the measured curve is compared with

the pre-edited curve. If the related rules are met, the result is “Pass”; or else is “Fail”.

2.2.6.1 Limit1

Select enable or disable limit1.

2.2.6.2 Limit1 Edit

Edit the properties of the limit1 lines.

Table 2-19 Limit1 Edit Menu

Function

Explanation

Type

Select the desired limit line (upper or lower) for editing

Mode

Select the line or point for editing. Set the number of the point to be edited if you selected

the point type. The range from 1 to 100

Add point

Add a new point for editing.

X-axis

Edit the X-axis value (frequency or time) of the current point. If the X-axis unit is

frequency and the Ref Freq is enabled, edit the frequency difference between the

frequency of the current point and the center frequency.

Amplitude

Edit the amplitude of the current point or line. If the Ref AMPT is enabled, edit the

amplitude difference between the amplitude of the current point and the reference level.

Del Point

Delete the point you are editing.

Del All

Delete all point.

Save/Recall

Save or load the limit file.

2.2.6.3 Limit2

Select enable or disable limit2.

2.2.6.4 Limit2 Edit

Edit the properties of the limit2 lines.

Table 2-20 Limit2 Edit Menu