Loading ...
Loading ...
Loading ...
24
2. Hold down the network status button on the product for at least five seconds to print a network
status sheet.
Note: If you release the button before five seconds has passed, a network connection report is
printed instead of a network status sheet.
3. Use your computer or wireless device to select the Wi-Fi network name (SSID) and password listed
in the Wi-Fi Direct section of the network status sheet.
Note: If you are connecting an Android device, the Wi-Fi and Wi-Fi Direct lights flash
simultaneously. Do one of the following:
• Press the Wi-Fi button to connect the device.
• Press the stop button to cancel the connection request.
You should now be able to print to your product directly from your computer or device. If you cannot
print successfully, repeat the process above and make sure you enter the password exactly as
written on the network status sheet.
Parent topic: Wi-Fi Direct Mode Setup
Related tasks
Printing a Network Status Sheet
Wi-Fi Protected Setup (WPS)
If your network uses a WPS-enabled wireless router or access point, you can quickly connect your
product to the network using Wi-Fi Protected Setup (WPS).
Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access
point. If there is no hardware button, there may be a virtual WPS button in the software for the device.
Check your network product documentation for details.
Using WPS to Connect to a Network
Parent topic: Wi-Fi or Wired Networking
Using WPS to Connect to a Network
If you have a WPS-enabled router or access point, you can use Wi-Fi Protected Setup (WPS) to connect
your device to the network.
Loading ...
Loading ...
Loading ...