Epson C11CG94201 WorkForce ST-M1000 Monochrome Supertank Printer

User Manual - Page 147

For C11CG94201.

PDF File Manual, 192 pages, Read Online | Download pdf file

C11CG94201 photo
Loading ...
Loading ...
Loading ...
147
If you cannot turn off your product, hold down the power button a little longer. If you still cannot turn off
your product, unplug the power cord, plug the power cord back in, then turn your product on and off
again using the power button.
Parent topic: Solving Setup Problems
Noise After Filling the Ink
If you hear noises from your product after filling the ink tank with ink, check these solutions:
The first time you fill the tank with ink, the product must charge its print head. Wait until charging
finishes before you turn off the product, or it may charge improperly and use excess ink the next time
you turn it on. Your product is finished charging the print head when the power light stops flashing.
If the product's print head stops moving or making noise, and the charging process has not finished,
turn off your product. Turn it back on and check to see if charging is still in progress. If it is still in
progress, contact Epson for help.
Parent topic: Solving Setup Problems
Software Installation Problems
If you have problems while installing your product software, try these solutions:
Make sure your product is turned on and any necessary cables are securely connected at both ends. If
you still have problems installing software, disconnect the cable and carefully follow the instructions on
the Start Here sheet. Also make sure your system meets the requirements for your operating system.
Close any other programs, including screen savers and virus protection software, and install your
product software again.
In Windows, make sure your product is selected as the default printer and the correct port is shown in
the printer properties.
If you see any error message or your software does not install correctly in Windows, you may not have
software installation privileges. Contact your system administrator.
If you are printing over a network, make sure your product is set up properly on the network.
Parent topic: Solving Setup Problems
Related concepts
Uninstall Your Product Software
Related references
Windows System Requirements
Mac System Requirements
Loading ...
Loading ...
Loading ...