Loading ...
Loading ...
Loading ...
6. PROGRAM | 25
6
PROGRAM
The PROGRAM section provides access to performance functions such
as recalling and storing programs, access to the Song and Live modes,
keyboard split functionality and more. This is also where menus contain-
ing System, Sound, MIDI and Extern settings are found. The menus and
their settings are covered in a separate chapter, starting on page 53.
M Note that the exact location of certain panel features may differ
depending on the manufacturing date of the instrument.
MORPH ASSIGN
The Morph is a very powerful tool,
which allows for controlling several
parameters at once using one control
“source”. A foot pedal can be used
to control the balance between a
piano and a synth sound, the wheel
to perform drawbar changes in a B3 sound, and increase the rate of a
selected effect by keyboard aftertouch – all at the same time.
The three MORPH ASSIGN buttons, WHEEL, A TOUCH, CTRLPED, repre-
sent the three available Morph Sources: the modulation wheel, keyboard
aftertouch, and control pedal.
A Morph is set up by holding down one of the Morph Assign buttons,
while at the same time moving a parameter control (for example a knob
or a drawbar) from the point where the morph should start to the point
where it should end. It is a good practice to have the control set to the
desired start position before pressing down the morph assign button.
The display will show the start and stop values as the morph is set up.
Multiple parameters can be adjusted while pressing down a Morph
Assign button, and additional morph destinations can be added after a
morph has been assigned.
The following parameters are available as Morph destinations:
Organ Piano Synth Effects
Level Level Level Effect 1 Rate
Drawbars LFO Rate Effect 1 Amt
Rotary speed Osc Ctrl Effect 2 Amt
LFO Amount Delay Tempo
Filter Freq Delay Feedback
Resonance Delay Mix
Arp Rate EQ Mid / Filter Freq
Drive
Reverb Dry/Wet
Double-clicking a Morph Assign button activates morph assign
latch mode, allowing for assigning morphs without keeping that
button pressed down. Press EXIT to leave latch mode.
Morphs can be copied from one control source to another. See
page 28 for details on how this is done.
Loading ...
Loading ...
Loading ...