Loading ...
Loading ...
Loading ...
4
Save these instructions for future reference.
Important Safety Instructions
IMPORTANT INSTRUCTIONS FOR UNPACKING
AND INSTALLATION
IMPORTANT - Read and follow the below instruc-
tions and precautions for unpacking, installing, and
servicing your appliance:
Remove all tape and packaging before using the
appliance. Destroy the carton and plastic bags after
unpacking the appliance. Never allow children to
play with packaging material. Do not remove the
wiring label and other literature attached to the appli-
ance. Do not remove model/serial number plate.
Cold temperatures can damage the electronic
control. When using this appliance for the first time,
or when the appliance has not been used for an
extended period of time, be sure the appliance has
been in temperatures above 32ºF (0ºC) for at least 3
hours before turning on the power to the appliance.
Never modify or alter the construction of the
appliance by removing the leveling legs, panels, wire
covers, anti-tip brackets/screws, or any other part of
the appliance.
Be sure to have an appropriate foam-type fire extin-
guisher available, visible, and easily accessible
located near the appliance.
GROUNDING INSTRUCTIONS
Avoid fire hazard or electrical shock. Failure to follow
this warning may cause serious injury, fire, or death.
Avoid fire hazard or electrical shock. Do not use an
adapter plug, use an extension cord, or remove
grounding prong from the power cord. Failure to
follow this warning may cause serious injury, fire, or
death.
Proper Installation—Be sure your appliance is
properly installed and grounded by a qualified techni-
cian. In the United States, install in accordance with
the National Fuel Gas Code ANSI Z223.1/NPFA No.
54, latest edition and National Electrical Code NFPA
No. 70 latest edition, and local electrical code
requirements. In Canada, install in accordance with
CAN/CGA B149.1 and CAN/CGA B149.2 and CSA
Standard C22.1, Canadian Electrical code, Part 1-
latest editions and local electrical code requirements.
Install only per installation instructions provided in
the literature package for this appliance.
For personal safety, this appliance must be properly
grounded. For maximum safety, the power cord must
be securely connected to an electrical outlet or
junction box that is the correct voltage, is correctly
polarized and properly grounded, and protected by a
circuit breaker in accordance with local codes and
ordinances.
It is the personal responsibility of the consumer to
have the appropriate outlet or junction box with the
correct, properly grounded wall receptacle installed
by a qualified electrician. It is the responsibility and
obligation of the consumer to contact a qualified
installer to assure that the electrical installation is
adequate and is in conformance with all local codes
and ordinances.
See the installation instructions packaged with this
appliance for complete installation and grounding
instructions.
Loading ...
Loading ...
Loading ...